DIY low profile 4mm connectors for E-Stim insertibles

General Chit Chat about E-Stim. Not just E-Stim Systems, but ErosTek, PES and others.
Post Reply
PelleParafin
Newbie
Posts: 1
Joined: Mon Jun 03, 2019 8:51 pm
Location: Norway

DIY low profile 4mm connectors for E-Stim insertibles

Post by PelleParafin »

DIY low profile (builds only 2-2.5mm from base) 4mm connectors for E-Stim insertibles.
I also used some slim 4mm female connectors, silicon insulated wires and shrinkwrap - very comfortable :D

You may get them from here: https://hobbyking.com/en_us/5mm-male-go ... s_products
Or do a general search for 4MM low profile banana plugs ;)

PelleParafin
You do not have the required permissions to view the files attached to this post.


User avatar
Stimaddict
Active Developer
Posts: 991
Joined: Wed Oct 25, 2017 11:56 am
Location: UK

Re: DIY low profile 4mm connectors for E-Stim insertibles

Post by Stimaddict »

Nice work. The plugs and connector parts are pretty cheap on eBay:
https://www.ebay.co.uk/itm/202742857117
https://tinyurl.com/yxt3hy99
Deltus1
Active Developer
Posts: 163
Joined: Sun Sep 09, 2018 2:40 pm
Location: Germany

Re: DIY low profile 4mm connectors for E-Stim insertibles

Post by Deltus1 »

Very well done.

Similar plugs are also offered as RC charging cables. The cable is already connected to the low profile plug. On the other side, you only need to cut off the superfluous plug and screw or solder on a suitable female plug.

Here is a source in Germany:

https://www.marfitec.de/Ladekabel

I'm sure you can find these Charging cable in other countries too.

Deltus
Greetings Deltus

---
DeepL helps me with the translation.
Mikestim
Active
Posts: 23
Joined: Tue Apr 02, 2019 11:46 pm
Location: US

Re: DIY low profile 4mm connectors for E-Stim insertibles

Post by Mikestim »

I purchased this back in 2016, still working great.
Only 5.99 US$
https://www.progressiverc.com/products/ ... -extension
Post Reply