Page 1 of 1

Axis output connector

Posted: Thu Dec 09, 2021 11:16 am
by Bob1
Hi - does anyone know any information about the output connectors on the Axis ? They are surface mounted 90 degree connectors and I need to replace one. I think they are the same connectors for all or most Elestrastim devices. They look slightly like Fakra connectors but I don't think they are. Information on the type, series, manufacturer, spare parts seller etc would be much appreciated thank you.

Re: Axis output connector

Posted: Sun Dec 12, 2021 5:25 pm
by Stimaddict
The Axis takes any standard TENS cable with a female plug - https://tinyurl.com/mtc2hj6u

Re: Axis output connector

Posted: Mon Dec 13, 2021 10:57 am
by Bob1
Thanks - unfortunately I'm not after the cables, I'm after the connectors for the cables that solder onto the circuit board. Cheers.

Re: Axis output connector

Posted: Wed Dec 29, 2021 11:05 am
by soundcraft
It might be worth while to buy one of them cheap Chinese power boxes with the same connection and remove the socket from it.

Re: Axis output connector

Posted: Fri Dec 31, 2021 11:13 am
by Bob1
soundcraft wrote: Wed Dec 29, 2021 11:05 am It might be worth while to buy one of them cheap Chinese power boxes with the same connection and remove the socket from it.
Thanks - do you know of any that have the same type of connectors ?

Re: Axis output connector

Posted: Fri Dec 31, 2021 1:30 pm
by admin
Bob1 wrote: Fri Dec 31, 2021 11:13 am
soundcraft wrote: Wed Dec 29, 2021 11:05 am It might be worth while to buy one of them cheap Chinese power boxes with the same connection and remove the socket from it.
Thanks - do you know of any that have the same type of connectors ?
Generally the cheap TENS units all use the same connector.

Si

Re: Axis output connector

Posted: Sun Jan 02, 2022 12:27 pm
by soundcraft
Bob1 wrote: Fri Dec 31, 2021 11:13 am
soundcraft wrote: Wed Dec 29, 2021 11:05 am It might be worth while to buy one of them cheap Chinese power boxes with the same connection and remove the socket from it.


Thanks - do you know of any that have the same type of connectors ?
Not all of them have the same connectors. Had a little look on ebay

The logistim tn-11 has the same type of connector I got one before I got my Axis ( wasted money LOL )

There is also Patterson Medical TPN 200 Plus

I would try and contact ElectraStim first though. it might work out cheaper to get them to fix is if these connectors do not fit. Also the Axis is a real pain in the ass to get apart.

Re: Axis output connector

Posted: Fri Jan 14, 2022 1:04 pm
by Bob1
soundcraft wrote: Sun Jan 02, 2022 12:27 pm
Bob1 wrote: Fri Dec 31, 2021 11:13 am
soundcraft wrote: Wed Dec 29, 2021 11:05 am It might be worth while to buy one of them cheap Chinese power boxes with the same connection and remove the socket from it.


Thanks - do you know of any that have the same type of connectors ?
Not all of them have the same connectors. Had a little look on ebay

The logistim tn-11 has the same type of connector I got one before I got my Axis ( wasted money LOL )

There is also Patterson Medical TPN 200 Plus

I would try and contact ElectraStim first though. it might work out cheaper to get them to fix is if these connectors do not fit. Also the Axis is a real pain in the ass to get apart.
Thanks - very helpful information cheers. Personally I haven't found the Axis difficult to open up - maybe you have missed the hidden screw underneather the front label that you need to remove ? Thanks again.