Tri Phase cable

General Chit Chat about E-Stim. Not just E-Stim Systems, but ErosTek, PES and others.
kksavas
Active
Posts: 16
Joined: Mon Sep 09, 2019 3:15 am
Location: germany

Re: Tri Phase cable

Post by kksavas »

thanks
i try it tonight ^^


mrbutt89
Active Developer
Posts: 565
Joined: Wed Feb 23, 2011 11:06 am
Location: Rayleigh, Essex, UK

Re: Tri Phase cable

Post by mrbutt89 »

One further thought on this...
If you use 2mm tens connectors for your electrodes, you may well find they are "stackable", meaning that you can join two cables simply by plugging one 2mm connector into the back of another 2mm connector. That makes it very easy to create the equivalent of a triphase cable, but with all the possible combinations available.

2mm pins are most commonly used for connection to TENS pads, but also some commercial electrodes, or you may find a 2mm>4mm adaptor for use with other electrodes. I generally dislike the 2mm pins because they're too fragile and easily bent/broken, but perhaps I'm just clumsy!
ontariowanker
Active
Posts: 18
Joined: Mon Jul 08, 2019 1:34 pm
Location: Ontario Canada

Re: Tri Phase cable

Post by ontariowanker »

Stimaddict wrote: Sat Jul 04, 2020 10:21 am

TriPhase, or a 3-Electrode Setup, is simply just this:

As a rule of thumb the "Common" electrode should be where you want the most stimulation. For me that's usually the glans, but if you like ball stimming better then position the common trode there. The common can be ANY electrode - a pad, a Conductive Rubber loop, a metal cock ring or a butt plug.

Great explanation! Thank you! :)
Ropeplayer
Active
Posts: 7
Joined: Tue Jul 14, 2020 9:42 pm
Location: Brighton

Re: Tri Phase cable

Post by Ropeplayer »

Thanks for the diagram. I will make up a set as I have access to all the parts.
Post Reply