Splitting outputs

The most versatile and user friendly E-Stim control unit available today. If you want More Power, More Control, and more fun, then the 2B is the one you want.
Post Reply
808Currents
Newbie
Posts: 3
Joined: Thu Oct 04, 2018 3:06 am
Location: Oahu

Splitting outputs

Post by 808Currents » Mon May 11, 2020 12:57 am

Is it possible to split the A & B outputs to accommodate more electrodes? I have a quadr-pole prostate massager and would like to also wire up some other "front end" electrodes using just one 2B. Is that possible? Thanks for any info anyone can give.



User avatar
Stimaddict
Active Developer
Posts: 427
Joined: Wed Oct 25, 2017 11:56 am
Location: UK

Re: Splitting outputs

Post by Stimaddict » Mon May 11, 2020 10:52 am

Yes, no problemo. You can split either or both A & B outputs using adapters like these: https://www.ebay.co.uk/itm/161085051445
Alternatively you can rig up your own adapter cable using a tail wire from a TENS pad.
Bear in mind that splitting the outputs will also change the perceived sensation so you will need to experiment to achieve the results you are looking for.

User avatar
Stimaddict
Active Developer
Posts: 427
Joined: Wed Oct 25, 2017 11:56 am
Location: UK

Re: Splitting outputs

Post by Stimaddict » Mon May 11, 2020 11:14 am

Just remembered E-Stim Systems sell an adapter too. With this one you simply plug in two cables to produce 4 outputs -
https://store.e-stim.co.uk/index.php?ma ... ucts_id=32
https://www.e-stimsystems.com/index.php ... mtprv0l2a7
.
Image

808Currents
Newbie
Posts: 3
Joined: Thu Oct 04, 2018 3:06 am
Location: Oahu

Re: Splitting outputs

Post by 808Currents » Tue May 12, 2020 11:30 pm

Aloha, Stimaddict!
Once again, you've come through! I just went through my tool box and sure enough, I just happen to have a couple of those splitters/adapters. Can't wait to try it out.
Thanks again for your expert advise. It is always appreciated.
Mahalo!

User avatar
Stimaddict
Active Developer
Posts: 427
Joined: Wed Oct 25, 2017 11:56 am
Location: UK

Re: Splitting outputs

Post by Stimaddict » Wed May 13, 2020 11:30 am

Aloha ‘aina stimming 808Currents. Shaka braddah, howzit?
I am no "expert", just tried a lot of things and want everyone to enjoy the same fun I'm having.
Ua mau ke o ka aina i ka pono! :D

demuc1973
Active
Posts: 45
Joined: Sun Jan 19, 2020 9:35 am
Location: Germany

Re: Aufteilen von Ausgängen

Post by demuc1973 » Thu May 21, 2020 2:09 am

I have with the splitters, similar to these, which E-Stim sells and to which Stimaddict refers a brief note:
Unfortunately, I initially tried cheap CN parts. Works so far - but the mechanical tolerance of the low-budget parts disturbed the fun because they showed loose contacts with the slightest vibrations. Really annoying if the signal keeps coming and going suddenly with stronger settings ... and expensive is not always excellent

It is also important to make sure that you do not create any unwanted chains - so think through all possible current paths through the body again before you switch on. But if it is well furnished - lots of fun and great minutes! :mrgreen:
"I am happy when it rains, because when I am not happy, it also rains." Quote from Karl Valentin - a Munich original and humorist

LatexKing
Newbie
Posts: 3
Joined: Fri Mar 08, 2013 9:36 am

Re: Splitting outputs

Post by LatexKing » Sat May 23, 2020 8:19 am

I've found that cable splitter and adapters are much more reliable than rigid ones.
They are also very cheap, if bought directly from china:
like:
https://www.aliexpress.com/item/4000704399518.html
or even 3 way:
https://www.aliexpress.com/item/4000274715601.html

As mentioned already, one should note that any outputs split from the same channel not isolated from each other
(unlike the original output A & output B)

Have fun.

Post Reply

Who is online

Users browsing this forum: No registered users and 13 guests