Hi folks,
Would it be a bad thing to have two electrodes that can take two inputs (the type you would use in a triphase setup), with one electrode from each channel into both.
Maybe a ring at the base of your cock and a ring under the helmet with 1 electrode from each channel into both rings
Is this good? And are there any dos and don’ts?
Thanks!
One plug from each channel into 2 electrodes
-
- Active
- Posts: 14
- Joined: Fri Apr 24, 2020 12:53 pm
- Location: Edinburgh
-
- Active
- Posts: 6
- Joined: Sat Nov 14, 2020 5:00 am
- Location: Canada
Re: One plug from each channel into 2 electrodes
I think you'd just end up with a very chaotic interference pattern as the signals from each channel superimpose over each other, so I'm not sure there's probably much point? If you're looking for a particular pattern you could put the effort into generating an audio file to drive the 2b instead. Is there something specific you're hoping to achieve with that setup?
-
- Active
- Posts: 14
- Joined: Fri Apr 24, 2020 12:53 pm
- Location: Edinburgh
Re: One plug from each channel into 2 electrodes
Thanks for your reply.
No, I just wanted to see if it might have positive effects like a triphase set up, but didn’t want to damage my machine!
Thanks again
No, I just wanted to see if it might have positive effects like a triphase set up, but didn’t want to damage my machine!
Thanks again
-
- Active Developer
- Posts: 213
- Joined: Sun Oct 25, 2020 1:45 pm
- Location: Shropshire
Re: One plug from each channel into 2 electrodes
Remember that the electrical.impulses will travel between the 2 electrode points.
If you have 4 electrodes that can potentially be 2 separate signals passing over eachother causing interference and many undesirable sensations.
I would take a look at the "understanding your sexual nerves'" post to help decode the best electrode positions and it can help you identify where the electrode signal will travel
If you have 4 electrodes that can potentially be 2 separate signals passing over eachother causing interference and many undesirable sensations.
I would take a look at the "understanding your sexual nerves'" post to help decode the best electrode positions and it can help you identify where the electrode signal will travel
-
- Active Developer
- Posts: 566
- Joined: Wed Feb 23, 2011 11:06 am
- Location: Rayleigh, Essex, UK
Re: One plug from each channel into 2 electrodes
It won't damage your machine if you're using a box where the channels are isolated from one another. However, you might find the sensations aren't what you're hoping for. The signals may cancel one another out, or combine to give you more intensity than you want.
An alternative idea would be to use a mono audio track with just one channel wired.
An alternative idea would be to use a mono audio track with just one channel wired.
- Stimaddict
- Active Developer
- Posts: 991
- Joined: Wed Oct 25, 2017 11:56 am
- Location: UK