first post..
I have been experimenting with my 2B in various ways. First, I am controlling it through the USB-serial interface with a perl prog. A bit cumbersome, and I have problems with the status readout, but it works ok.
Second, I have recently bought a USB board with 8 relays. This has two advantages:
- The 2B, at least when controlled via the serial interface, cannot give out a quick jolt. The power is ramped up. By switching the relay, you can produce a jolt.
- When switching one channel directly and the other by combining 2 relays per terminal, you are getting 6 "channels" that can be connected to your body, e.g. bipolar electrodes on each nippel, one at the private parts, one anal, two more wherever.. and program controlled, the power can be increased each time a channel is activated.
These two properties together should make interesting SM scenarios possible.
Using only 2 spots numbs the nerves quickly.Too bad the 2B cannot directly control the waveform, my TENS can do that, and the nerves don't adapt that quickly with different frequencies and waveforms.
