Simple Serial Port Tester

The most versatile and user friendly E-Stim control unit available today. If you want More Power, More Control, and more fun, then the 2B is the one you want.
Post Reply
User avatar
admin
Site Admin
Posts: 2100
Joined: Tue Feb 19, 2008 8:14 pm
Location: Watford,UK
Contact:

Simple Serial Port Tester

Post by admin »

One of the problems with modern computers is the lack of all the tools we sued to get. so we have now created a simple digital link tester. Simply copy the file to your desktop, extract it and then run it. You should then be able to connect to a serial port and send data to the Digital Link Interface.

If you don't see the correct serial port in the drop down, then you have not installed the drivers.

To test the digital link cable use a coin or metallic item to short the tip and the ring together. Then anything you 'Send' should show up on the screen. V will ask what version you are running (both for Commander and a 2B in bootloader mode), A10 will set channel A to level 10.

For the techies the serial port tester is set for 9600 8N1 with no local echo.

I'll get around to a little more manual writing for it soon.

Any issues or questions please post here!!!!
You do not have the required permissions to view the files attached to this post.


E-Stim Systems Ltd
Post Reply