Hey,
I bought 2b power box around 2 weeks ago and I immediately upgraded it to version 2.06 with no problem.
After that It worked perfectly without any problems or issues until today.
When i turned it on today it is endlesly looping with first "e-stim systems etc..." and then after showing "version 2.06" it would start from the beginning.
I tried to start the bootloader but it just shows blank screen without the B.
Is there anything i can try to fix it?
Stuck at startup
-
- Newbie
- Posts: 2
- Joined: Wed Jul 04, 2018 7:27 pm
- Location: oulu
- admin
- Site Admin
- Posts: 2111
- Joined: Tue Feb 19, 2008 8:14 pm
- Location: Watford,UK
- Contact:
Re: Stuck at startup
there is no 2.06..... do you mean 2.106?
Did you have any issues with the update?
Have you changed the battery?
Having a corrupted Bootloader is very unusual, (Do you have the log file for the upload?) but if that is the case, then its a return to base for a reflash or a rechip..... drop info@e-stim.co.uk for more info
Si
Did you have any issues with the update?
Have you changed the battery?
Having a corrupted Bootloader is very unusual, (Do you have the log file for the upload?) but if that is the case, then its a return to base for a reflash or a rechip..... drop info@e-stim.co.uk for more info
Si
E-Stim Systems Ltd
-
- Newbie
- Posts: 2
- Joined: Wed Jul 04, 2018 7:27 pm
- Location: oulu
Re: Stuck at startup
yeah 2.106. i was thinking and writing differend things.
I had no issues with the update and it worked just fine for few days.
I tried it with both battery and power supply.
and i have the log file:
29.6.2018 16:59 Uplink V2.1.0 (8.4.2013) starting
29.6.2018 16:59 COM7 detected
29.6.2018 16:59 Bootable 2B Selected
29.6.2018 16:59 COM7 is opened
29.6.2018 16:59 Bootloader V1.4 detected
29.6.2018 16:59 Firmware V2.105R detected
29.6.2018 16:59 Send Firmware File
29.6.2018 17:01 Send Firmware File
29.6.2018 17:01 Opening 2B106.2bfx
29.6.2018 17:01 Reading Data
29.6.2018 17:01 41974 bytes read
29.6.2018 17:01 Decrypting Data
29.6.2018 17:01 MD5 Digest : 227235DBB334E082A537CF5EEE98731F
29.6.2018 17:02 MD5 Digest Accepted
29.6.2018 17:02 937 Lines to be processed
29.6.2018 17:07 Send successful - port has been closed
29.6.2018 17:07 Transfer Complete
29.6.2018 17:07 Bootable 2B Selected
29.6.2018 17:07 COM7 is opened
29.6.2018 17:07 Unknown version response :[]
29.6.2018 17:07 Port has been closed
29.6.2018 17:08 Bootable 2B Selected
29.6.2018 17:08 COM7 is opened
29.6.2018 17:08 Bootloader V1.4 detected
29.6.2018 17:08 Firmware V2.106R detected
29.6.2018 17:08 Port has been closed
I will send email later today.
thanks
I had no issues with the update and it worked just fine for few days.
I tried it with both battery and power supply.
and i have the log file:
29.6.2018 16:59 Uplink V2.1.0 (8.4.2013) starting
29.6.2018 16:59 COM7 detected
29.6.2018 16:59 Bootable 2B Selected
29.6.2018 16:59 COM7 is opened
29.6.2018 16:59 Bootloader V1.4 detected
29.6.2018 16:59 Firmware V2.105R detected
29.6.2018 16:59 Send Firmware File
29.6.2018 17:01 Send Firmware File
29.6.2018 17:01 Opening 2B106.2bfx
29.6.2018 17:01 Reading Data
29.6.2018 17:01 41974 bytes read
29.6.2018 17:01 Decrypting Data
29.6.2018 17:01 MD5 Digest : 227235DBB334E082A537CF5EEE98731F
29.6.2018 17:02 MD5 Digest Accepted
29.6.2018 17:02 937 Lines to be processed
29.6.2018 17:07 Send successful - port has been closed
29.6.2018 17:07 Transfer Complete
29.6.2018 17:07 Bootable 2B Selected
29.6.2018 17:07 COM7 is opened
29.6.2018 17:07 Unknown version response :[]
29.6.2018 17:07 Port has been closed
29.6.2018 17:08 Bootable 2B Selected
29.6.2018 17:08 COM7 is opened
29.6.2018 17:08 Bootloader V1.4 detected
29.6.2018 17:08 Firmware V2.106R detected
29.6.2018 17:08 Port has been closed
I will send email later today.
thanks