Mac OS 10.14.1 no Connection with 2B ?

The Forum for Mac users of Commander
Post Reply
Deltus1
Newbie
Posts: 3
Joined: Sun Sep 09, 2018 2:40 pm
Location: Germany

Mac OS 10.14.1 no Connection with 2B ?

Post by Deltus1 » Thu Dec 06, 2018 3:53 pm

I was just trying to get my newly purchased 2B Difgital Interface up and running.

Commander 3 can not connect to the 2B.
The 2B is of course on, Command Mode on. the interface cable is plugged in.

I'm using a MacBook Pro 2018 OS 10.14.1 with a USB-C to USB-A adapter.

Is the problem known? Is there a solution?

Best regards
Deltus



User avatar
admin
Site Admin
Posts: 855
Joined: Tue Feb 19, 2008 8:14 pm
Location: Watford,UK
Contact:

Re: Mac OS 10.14.1 no Connection with 2B ?

Post by admin » Thu Dec 06, 2018 4:37 pm

First question is have you actually switched Commander on on the 2B, if it shows Commander:On, then you have not read the instructions... Press select again once you see Commander:On

secondly does your Mac 'see' the digital Interface?

Image

There is no problems running Commander 3 on a Mac, indeed much of the developement for Commader 3 is Mac based

The full instructions can be found..... at https://e-stim.info/commander/mac

Si
E-Stim Systems Ltd

Deltus1
Newbie
Posts: 3
Joined: Sun Sep 09, 2018 2:40 pm
Location: Germany

Re: Mac OS 10.14.1 no Connection with 2B ?

Post by Deltus1 » Thu Dec 06, 2018 5:25 pm

Thank you for the quick Answer!

Yes, I swicht the 2B on Commander:On
2B_Disply.jpg
I think my Mac does see the the digital Interface (see Screen shot)
Bildschirmfoto 2018-12-06 um 18.08.47.jpg
But when I click Connect it shows tis error:
Bildschirmfoto 2018-12-06 um 18.09.09.jpg
I think, I followed the Instruktions ?

Best regards
Deltius
You do not have the required permissions to view the files attached to this post.

User avatar
admin
Site Admin
Posts: 855
Joined: Tue Feb 19, 2008 8:14 pm
Location: Watford,UK
Contact:

Re: Mac OS 10.14.1 no Connection with 2B ?

Post by admin » Thu Dec 06, 2018 10:09 pm

Deltus1 wrote:
Thu Dec 06, 2018 5:25 pm
Thank you for the quick Answer!

Yes, I swicht the 2B on Commander:On
2B_Disply.jpg

You have NOT switched Commander on at this point only selected it. When you see this screen, press SELECT again to return to the main screen, this time you should see an arrow on the bottom line of the screen. with the normal A:OFF etc

Or upgrade to 2.106 which has the Commander Interface automatically switched on.

Si
You do not have the required permissions to view the files attached to this post.
E-Stim Systems Ltd

Deltus1
Newbie
Posts: 3
Joined: Sun Sep 09, 2018 2:40 pm
Location: Germany

Re: Mac OS 10.14.1 no Connection with 2B ?

Post by Deltus1 » Fri Dec 07, 2018 3:53 pm

OK, now I got it an it works.

Thank you for the advice!

Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests