spike / peak on 50%

The unique Audio sensation....the ABox. How to get the best out of your ABox.
Post Reply
Singular
Newbie
Posts: 1
Joined: Sun Jun 04, 2017 4:13 am
Location: Germany

spike / peak on 50%

Post by Singular » Sun Jun 04, 2017 4:24 am

Hi,

i got an A-Box some time ago, and have some problem.

Everytime the audiosignal goes quicker loud i get an shock...
but only if the signal was under 50% (the 50% LED is off)

When the volume rises from 0 to 25 or from 50 to 100 there is no problem.

but quick ramps from 0 or 25 over 50% give me a shock/peak... its even higher when it jumps from >0 to 100
i also feel that it has a higher output at round about 50% when the ramp rises slowly.

Does anyone know what i can do about that?

tested it with 2 PCs and 3 Soundcards, maybe its because how that box works?

sadly i bought the box used and the seal is broken :-(
Any suggestions are welcome.

regards
Singular



User avatar
admin
Site Admin
Posts: 666
Joined: Tue Feb 19, 2008 8:14 pm
Location: Watford,UK
Contact:

Re: spike / peak on 50%

Post by admin » Sun Jun 04, 2017 10:53 am

We can offer to look at the unit even though it is out of repair, (for a small fee) just drop an email to info at e-stim.co.uk, however what you describe doesn't sound like a fault, but more down to the your response. Human response to E-Stim is not linear, and the absolute level is controlled by the output level control, so a rapid increase in signal might feel more spikey than what has previously been felt.

Si
E-Stim Systems Ltd

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest