For several years now I have been using my 2B with a power supply. I did not buy a power supply, but found a suitable one from an old scanner. Power supply parameters: 12 volts, 1 ampere.
How safe is it?
Power supply 2B
- cbtslavecom
- Active
- Posts: 40
- Joined: Thu Dec 21, 2017 2:01 pm
- Location: Moskva
-
- Active
- Posts: 5
- Joined: Mon Jan 22, 2018 10:54 pm
- Location: scunthorpe
Re: Power supply 2B
My guess is yes, if the voltage and amps match, electricity is electricity.
Maybe the fact it's old might mean that the flow of electricity has more of a ripple, but that shouldn't effect most ICs.
I'd use it once i'd tested it with a multimeter but it might be wise to use a surge protector.
Maybe the fact it's old might mean that the flow of electricity has more of a ripple, but that shouldn't effect most ICs.
I'd use it once i'd tested it with a multimeter but it might be wise to use a surge protector.
- admin
- Site Admin
- Posts: 2122
- Joined: Tue Feb 19, 2008 8:14 pm
- Location: Watford,UK
- Contact:
Re: Power supply 2B
We would never recommend using a non approved power supply with the 2B. Yes volts is volts to a certain extent, but I would question whether the power supply has the correct level of isolation and thus safety required. And you have invalidated your lifetime guarantee on the 2B by using it.
Si
Si
E-Stim Systems Ltd
-
- Active
- Posts: 4
- Joined: Sat Jul 30, 2016 1:02 pm
- Location: The Netherlands
Re: Power supply 2B
With cheap supplies it's always a guess if the 230 and 12 volt circuits are properly divided to prevent 230v to flow to the 12 volt parts and in to the device connected. Shielding and noise prevention also differ. When you have a good quality power supply from a reputable brand and not a cheap supply made in China delivered via e.g. Aliexpress there should be no problem as long as it matches the specifications for volts, amps and connector.
-
- Active Developer
- Posts: 162
- Joined: Mon Aug 11, 2008 6:58 pm
Re: Power supply 2B
Other than the fact they've just admitted to using an unofficial power supply, how on earth would you know they had done that??admin wrote: ↑Tue Jan 23, 2018 10:18 am We would never recommend using a non approved power supply with the 2B. Yes volts is volts to a certain extent, but I would question whether the power supply has the correct level of isolation and thus safety required. And you have invalidated your lifetime guarantee on the 2B by using it.
Unofficial Python API for the E-Stim 2B: https://github.com/fredhatt/estim2bapi
Generating sounds in Python: https://github.com/fredhatt/estimsoundsynth
Generating sounds in Python: https://github.com/fredhatt/estimsoundsynth
- admin
- Site Admin
- Posts: 2122
- Joined: Tue Feb 19, 2008 8:14 pm
- Location: Watford,UK
- Contact:
Re: Power supply 2B
The little man who lives inside every 2B tells us.
But we can generally tell as if a unit is having issues with a power supply, we normally ask to see the power supply - then its wrong plug, wrong voltages etc etc
Si
But we can generally tell as if a unit is having issues with a power supply, we normally ask to see the power supply - then its wrong plug, wrong voltages etc etc
Si
E-Stim Systems Ltd