Flashing screen while in stereo mode
-
- Active
- Posts: 27
- Joined: Thu May 16, 2019 1:08 pm
- Location: Germany
Flashing screen while in stereo mode
Hi guys, anybody else had this phenomenon? I used stereo mode with my iPad, and the screen startet flashing also the power symbol sometimes flashed between battery and main power supply ( I don’t have a power supply yet it’s just running on batteries). Except for that it is flashing it works just fine I think.
- estim_si
- Staff
- Posts: 364
- Joined: Tue Feb 19, 2008 11:23 pm
- Location: Watford
- Contact:
Re: Flashing screen while in stereo mode
Perfectly normally when you are driving the 2B heavily.
Si
Sent from my iPhone using Tapatalk
Si
Sent from my iPhone using Tapatalk
-
- Active
- Posts: 27
- Joined: Thu May 16, 2019 1:08 pm
- Location: Germany
Re: Flashing screen while in stereo mode
Good to know thanks!
- Stimaddict
- Active Developer
- Posts: 991
- Joined: Wed Oct 25, 2017 11:56 am
- Location: UK
Re: Flashing screen while in stereo mode
Flashing screen is often an indication that the volume on your audio device is too high - viewtopic.php?f=14&t=9670&p=14169#p14169
-
- Active
- Posts: 27
- Joined: Thu May 16, 2019 1:08 pm
- Location: Germany
Re: Flashing screen while in stereo mode
yeah i was at 100% because otherwise the indicators above the channel level were just not there.... or do they also start to appear with higher channel lvls? I've already read a few other posts here but still didn't get how to balance it best between volume and the channel level....
- Stimaddict
- Active Developer
- Posts: 991
- Joined: Wed Oct 25, 2017 11:56 am
- Location: UK
Re: Flashing screen while in stereo mode
No, when the track is playing the indicators (audio bars) will still move with the power knobs set to zero.
This was probably down to the actual stimfile you were using. For a simple explanation of why some stimfiles don't work so well on the 2B see this post:
viewtopic.php?f=14&t=9774&p=14762#p14762