Audio files designed with 2B in mind

The most versatile and user friendly E-Stim control unit available today. If you want More Power, More Control, and more fun, then the 2B is the one you want.
stim78
Newbie
Posts: 2
Joined: Sat Dec 07, 2019 9:52 am
Location: France

Re: Audio files designed with 2B in mind

Post by stim78 »

Thank you admin,

Thus, with the exception of internal routines, the 2B transforms a pure (sinusoidal) signal to send it to the electrodes in the form of a biphasic AC signal in a frequency range of ± 50 to ± 5 kHz. Is it correct ?
At the same time, I understand that the ET-312 is doing the same thing "but not in the same way" with a maximum of ± 330 Hz ...
Do you think this difference in frequency range between the two devices is purely a technical choice or is it due to a difference in legislation between the two countries?
Thank you for your advice and excuse my technical curiosity ...
stim78


User avatar
admin
Site Admin
Posts: 2100
Joined: Tue Feb 19, 2008 8:14 pm
Location: Watford,UK
Contact:

Re: Audio files designed with 2B in mind

Post by admin »

stim78 wrote: Mon Dec 09, 2019 8:39 am Thank you admin,

Thus, with the exception of internal routines, the 2B transforms a pure (sinusoidal) signal to send it to the electrodes in the form of a biphasic AC signal in a frequency range of ± 50 to ± 5 kHz. Is it correct ?
Nope, it more complex than that and its not something we actually publish as we never designed the 2B to work with pure tones.
At the same time, I understand that the ET-312 is doing the same thing "but not in the same way" with a maximum of ± 330 Hz ...
Do you think this difference in frequency range between the two devices is purely a technical choice or is it due to a difference in legislation between the two countries?
Thank you for your advice and excuse my technical curiosity ...
stim78
There is no legislation covering frequencies used, just research into effective frequencies and information regarding basic product safety and energy transfer. (There is legislation for TENS units which we do use although our boxes are not classed as TENS units, but that more a safety area rather than an effectiveness issue.)

Si
E-Stim Systems Ltd
mrbutt89
Active Developer
Posts: 565
Joined: Wed Feb 23, 2011 11:06 am
Location: Rayleigh, Essex, UK

Re: Audio files designed with 2B in mind

Post by mrbutt89 »

admin wrote: Mon Dec 09, 2019 11:06 am Nope, it more complex than that and its not something we actually publish as we never designed the 2B to work with pure tones.
Si
I gather the 2B was designed to work with music as the audio input to the Stereo routine. Has there ever been any move to design a new Stereo routine that will be more specifically designed to handle pure tones, or is that not technically feasible for some reason?
User avatar
admin
Site Admin
Posts: 2100
Joined: Tue Feb 19, 2008 8:14 pm
Location: Watford,UK
Contact:

Re: Audio files designed with 2B in mind

Post by admin »

Not with the current incantation of the 2B hardware. However there are plans afoot.....

Si
E-Stim Systems Ltd
mrbutt89
Active Developer
Posts: 565
Joined: Wed Feb 23, 2011 11:06 am
Location: Rayleigh, Essex, UK

Re: Audio files designed with 2B in mind

Post by mrbutt89 »

admin wrote: Thu Feb 06, 2020 1:36 pm Not with the current incantation of the 2B hardware. However there are plans afoot.....

Si
This sounds interesting. It would help unleash more of the potential of all those audio files out there in the public domain. I'll just have to be patient and keep an eye open...
ltxtk
Active
Posts: 5
Joined: Thu Feb 27, 2020 7:49 am
Location: Germany

Re: Audio files designed with 2B in mind

Post by ltxtk »

If anyone needs a playground for making their own sound files, these are great ressources

https://learningsynths.ableton.com/

http://sampulator.com/
comeagain
Newbie
Posts: 3
Joined: Sun Feb 02, 2020 12:34 pm
Location: uk

Re: Audio files designed with 2B in mind

Post by comeagain »

quick question on audio files - for increasing power output, is there an alternative to turning the dials on the 2B ?

i know the volume on output device should be about 65%, so can't increase that.
tried playing with levels in a file, but that didn't seem to work
Can't use the Digital Link Protocol (I think) as the socket is used already for the audio input

any ideas? I can't be the only one not wanting to twiddle knobs when using audio files :lol:
User avatar
Stimaddict
Active Developer
Posts: 991
Joined: Wed Oct 25, 2017 11:56 am
Location: UK

Re: Audio files designed with 2B in mind

Post by Stimaddict »

comeagain> Let's get this right. You want more power in Stereo mode, is that correct?
Or are you looking for something to automatically increase the power over a period of time?
Switcher81
Active
Posts: 23
Joined: Sun Nov 24, 2019 3:43 pm
Location: Germany

Re: Audio files designed with 2B in mind

Post by Switcher81 »

Hi!

Playing with the levels in the audio file should do the trick pretty well. However, you have to try around a little bit to see what works best for you. I still have trouble myself to get the files somewhat right, since the device's response does seem non-linear (or at least the stimulation it creates).
comeagain
Newbie
Posts: 3
Joined: Sun Feb 02, 2020 12:34 pm
Location: uk

Re: Audio files designed with 2B in mind

Post by comeagain »

I was wanting some way to ramp the power over time.

Anyhow with all this time on my hands I decided to write a little program to do this, it will load audio files and play at volumes / durations I specify, a bit like the milanova.com teases
Post Reply