Splitting outputs

The most versatile and user friendly E-Stim control unit available today. If you want More Power, More Control, and more fun, then the 2B is the one you want.
808Currents
Newbie
Posts: 3
Joined: Thu Oct 04, 2018 3:06 am
Location: Oahu

Splitting outputs

Post by 808Currents »

Is it possible to split the A & B outputs to accommodate more electrodes? I have a quadr-pole prostate massager and would like to also wire up some other "front end" electrodes using just one 2B. Is that possible? Thanks for any info anyone can give.


User avatar
Stimaddict
Active Developer
Posts: 991
Joined: Wed Oct 25, 2017 11:56 am
Location: UK

Re: Splitting outputs

Post by Stimaddict »

Yes, no problemo. You can split either or both A & B outputs using adapters like these: https://www.ebay.co.uk/itm/161085051445
Alternatively you can rig up your own adapter cable using a tail wire from a TENS pad.
Bear in mind that splitting the outputs will also change the perceived sensation so you will need to experiment to achieve the results you are looking for.
User avatar
Stimaddict
Active Developer
Posts: 991
Joined: Wed Oct 25, 2017 11:56 am
Location: UK

Re: Splitting outputs

Post by Stimaddict »

Just remembered E-Stim Systems sell an adapter too. With this one you simply plug in two cables to produce 4 outputs -
https://store.e-stim.co.uk/index.php?ma ... ucts_id=32
https://www.e-stimsystems.com/index.php ... mtprv0l2a7
.
Image
808Currents
Newbie
Posts: 3
Joined: Thu Oct 04, 2018 3:06 am
Location: Oahu

Re: Splitting outputs

Post by 808Currents »

Aloha, Stimaddict!
Once again, you've come through! I just went through my tool box and sure enough, I just happen to have a couple of those splitters/adapters. Can't wait to try it out.
Thanks again for your expert advise. It is always appreciated.
Mahalo!
User avatar
Stimaddict
Active Developer
Posts: 991
Joined: Wed Oct 25, 2017 11:56 am
Location: UK

Re: Splitting outputs

Post by Stimaddict »

Aloha ‘aina stimming 808Currents. Shaka braddah, howzit?
I am no "expert", just tried a lot of things and want everyone to enjoy the same fun I'm having.
Ua mau ke o ka aina i ka pono! :D
User avatar
demuc1973
Active Developer
Posts: 114
Joined: Sun Jan 19, 2020 9:35 am
Location: Germany

Re: Splitting outputs

Post by demuc1973 »

I have with the splitters, similar to these, which E-Stim sells and to which Stimaddict refers a brief note:
Unfortunately, I initially tried cheap CN parts. Works so far - but the mechanical tolerance of the low-budget parts disturbed the fun because they showed loose contacts with the slightest vibrations. Really annoying if the signal keeps coming and going suddenly with stronger settings ... and expensive is not always excellent

It is also important to make sure that you do not create any unwanted chains - so think through all possible current paths through the body again before you switch on. But if it is well furnished - lots of fun and great minutes! :mrgreen:
Last edited by demuc1973 on Fri May 29, 2020 3:47 am, edited 1 time in total.
"I am happy when it rains, because when I am not happy, it also rains." Quote from Karl Valentin - a Munich original and humorist
LatexKing
Newbie
Posts: 3
Joined: Fri Mar 08, 2013 9:36 am

Re: Splitting outputs

Post by LatexKing »

I've found that cable splitter and adapters are much more reliable than rigid ones.
They are also very cheap, if bought directly from china:
like:
https://www.aliexpress.com/item/4000704399518.html
or even 3 way:
https://www.aliexpress.com/item/4000274715601.html

As mentioned already, one should note that any outputs split from the same channel not isolated from each other
(unlike the original output A & output B)

Have fun.
Tobi171986
Active
Posts: 5
Joined: Fri May 29, 2020 2:08 pm
Location: Deutschland

Re: Splitting outputs

Post by Tobi171986 »

You also can use very flexible variants like that: https://www.amazon.de/gp/product/B07WC4 ... =UTF8&th=1 maybe this might be interesting for any DIY things...
User avatar
demuc1973
Active Developer
Posts: 114
Joined: Sun Jan 19, 2020 9:35 am
Location: Germany

Re: Splitting outputs

Post by demuc1973 »

It is interesting, although not for me for E-Stim - i have other interests / obligations, too ;)
"I am happy when it rains, because when I am not happy, it also rains." Quote from Karl Valentin - a Munich original and humorist
jandfx
Active
Posts: 7
Joined: Mon Apr 03, 2017 10:18 am
Location: Germany - Berlin
Contact:

Re: Splitting outputs

Post by jandfx »

I have two dual split adapters from
https://www.mystim24.de/reizstrom-zubeh ... kabel/?p=1

Janek

Gesendet von meinem SM-T719 mit Tapatalk

Post Reply