Just Add Water
-
- Active Developer
- Posts: 566
- Joined: Wed Feb 23, 2011 11:06 am
- Location: Rayleigh, Essex, UK
Re: Just Add Water
Here's a pic of me using it. If you look carefully, you can see little strands of precum in the liquid. It also has a very flattering magnifying effect!
You do not have the required permissions to view the files attached to this post.
-
- Active
- Posts: 5
- Joined: Wed Sep 09, 2020 2:03 pm
- Location: Germany
Re: Just Add Water
that looks interesting, is the bottle built by yourself or where can you buy it?
-
- Active Developer
- Posts: 566
- Joined: Wed Feb 23, 2011 11:06 am
- Location: Rayleigh, Essex, UK
-
- Active
- Posts: 6
- Joined: Sun Oct 04, 2020 1:09 pm
- Location: London
Re: Just Add Water
Thats a great photo! I suspect the current is therefor distributed all around your member. How does it feel?
-
- Active Developer
- Posts: 566
- Joined: Wed Feb 23, 2011 11:06 am
- Location: Rayleigh, Essex, UK
Re: Just Add Water
It feels quite diffuse. As you say, it affects the whole member. As a result it can feel like a generalised tingle. I haven't used the encapsulator much recently, both because of the time taken to set up and clear away, and because I prefer more focussed stimulation from CR loops or similar.
- Ronfire7
- Active Developer
- Posts: 192
- Joined: Tue Dec 08, 2020 2:35 am
- Location: Merritt BC Canada
Re: Just Add Water
I would not be difficult to build one that should function the same. Use a manual penis pump with the bulb pump system as it could take water without damage. Then run a strip of copper foil along the inside under the seal and to the outside , have a tens connection with the wire under the conductive adhesive. Put on the seal over the copper foil, if you are worried about a small air leak just add a little thick lube or conductive gel in that area.
Have the parts ordered today from Alli and will try it out in about a month when it arrives. Worst case is it does not work well and you still have a functioning penis pump.
Have the parts ordered today from Alli and will try it out in about a month when it arrives. Worst case is it does not work well and you still have a functioning penis pump.
-
- Active
- Posts: 12
- Joined: Mon Oct 18, 2021 2:35 pm
- Location: Deutschland
Re: Just Add Water
Hello, I tried the simplified setup with the water glass over the weekend and what can I say, pretty cool . I used my old Tension Lover for the first try, but next I'll definitely try the 2B
As the electrode in the water, I used the inside of an old antenna cable, where I exposed part of the copper wire both at the top and at the bottom. In the lower area a little more to be able to lay a loop on the glass floor. In my opinion, the advantage of the cable is that it already has its own insulation.
As the electrode in the water, I used the inside of an old antenna cable, where I exposed part of the copper wire both at the top and at the bottom. In the lower area a little more to be able to lay a loop on the glass floor. In my opinion, the advantage of the cable is that it already has its own insulation.