How much conductive lube do you need?
-
- Active
- Posts: 36
- Joined: Fri Dec 11, 2020 10:33 pm
- Location: Trois-Rivières
Re: How much conductive lube do you need?
Would adding some salt or baking soda to commercial "personal lube" improve conductivity? Not getting much prostate "signal" - all ends up on my ballsack.... (which is pretty groovy, but...)
- Stimaddict
- Active Developer
- Posts: 991
- Joined: Wed Oct 25, 2017 11:56 am
- Location: UK
Re: How much conductive lube do you need?
@LeBete> Be careful of what's actually in "personal lube" coz it must not contain any oils, silicon or stuff like henna. Adding a pinch of baking soda (*not* baking powder) to water-based lube will improve conductivity but it doesn't keep for more than a couple of days so you're still better off using conductive gel.
If you're not feeling an electrical 'hit' at your balls then that is completely normal. Stimulating the Perineal nerves is more subliminal but it's still working. The idea is that you feel the most sensation at the cock head.
If you're not feeling an electrical 'hit' at your balls then that is completely normal. Stimulating the Perineal nerves is more subliminal but it's still working. The idea is that you feel the most sensation at the cock head.
-
- Active
- Posts: 36
- Joined: Fri Dec 11, 2020 10:33 pm
- Location: Trois-Rivières
Re: How much conductive lube do you need?
Thanks, thing is for inserting I need lube and the conducting gel is pretty sticky stuff. And it's my prostate I'm not getting signal at. (Using the ErosTek ball). Hoping mixing some salt or baking soda in the lube will improve the contact near the prosate.Stimaddict wrote: ↑Tue May 25, 2021 5:09 pm @LeBete> Be careful of what's actually in "personal lube" coz it must not contain any oils, silicon or stuff like henna. Adding a pinch of baking soda (*not* baking powder) to water-based lube will improve conductivity but it doesn't keep for more than a couple of days so you're still better off using conductive gel.
If you're not feeling an electrical 'hit' at your balls then that is completely normal. Stimulating the Perineal nerves is more subliminal but it's still working. The idea is that you feel the most sensation at the cock head.
Not sure when the 2B shows up but there will be a Moaner in there. Hope that works well.
- estim_si
- Staff
- Posts: 364
- Joined: Tue Feb 19, 2008 11:23 pm
- Location: Watford
- Contact:
Re: How much conductive lube do you need?
Try swapping the connections. The output is asymmetrical so swapping the connections can move the sensation.LeBete wrote:Would adding some salt or baking soda to commercial "personal lube" improve conductivity? Not getting much prostate "signal" - all ends up on my ballsack.... (which is pretty groovy, but...)
Si
Sent from my iPhone using Tapatalk
- Stimaddict
- Active Developer
- Posts: 991
- Joined: Wed Oct 25, 2017 11:56 am
- Location: UK
Re: How much conductive lube do you need?
Water-based lube is fine on its own for anal insertables IMHO because good contact is assured due to your internal anatomy. If you're waiting for a 2B + Moaner then I guarantee that will fix you upLeBete wrote: ↑Tue May 25, 2021 6:03 pm Thanks, thing is for inserting I need lube and the conducting gel is pretty sticky stuff. And it's my prostate I'm not getting signal at. (Using the ErosTek ball). Hoping mixing some salt or baking soda in the lube will improve the contact near the prosate.
Not sure when the 2B shows up but there will be a Moaner in there. Hope that works well.
-
- Active
- Posts: 36
- Joined: Fri Dec 11, 2020 10:33 pm
- Location: Trois-Rivières
Re: How much conductive lube do you need?
I've tried that before to no discernible effect, alas....estim_si wrote: ↑Tue May 25, 2021 6:11 pmTry swapping the connections. The output is asymmetrical so swapping the connections can move the sensation.LeBete wrote:Would adding some salt or baking soda to commercial "personal lube" improve conductivity? Not getting much prostate "signal" - all ends up on my ballsack.... (which is pretty groovy, but...)
-
- Active
- Posts: 36
- Joined: Fri Dec 11, 2020 10:33 pm
- Location: Trois-Rivières
Re: How much conductive lube do you need?
I'll hold you to that!Stimaddict wrote: ↑Tue May 25, 2021 6:18 pm If you're waiting for a 2B + Moaner then I guarantee that will fix you up
- Stimaddict
- Active Developer
- Posts: 991
- Joined: Wed Oct 25, 2017 11:56 am
- Location: UK
Re: How much conductive lube do you need?
Lol! I'm confident you'll love your 2B once you learn how to get the best out of it. The Moaner is very popular coz it sits really nicely against your prostate. You can use it normally as a bipolar butt trode or you could try connecting just the head as a monopolar trode linked to another trode on your cock. This drives current straight through your prostate for a different sensation. I call it the "rumble-in-the-jungle"
-
- Active
- Posts: 36
- Joined: Fri Dec 11, 2020 10:33 pm
- Location: Trois-Rivières
Re: How much conductive lube do you need?
I've seen that mentioned by you elsewhere. Can't wait to be shaken and stirred.Stimaddict wrote: ↑Wed May 26, 2021 9:40 am Lol! I'm confident you'll love your 2B once you learn how to get the best out of it. The Moaner is very popular coz it sits really nicely against your prostate. You can use it normally as a bipolar butt trode or you could try connecting just the head as a monopolar trode linked to another trode on your cock. This drives current straight through your prostate for a different sensation. I call it the "rumble-in-the-jungle"
- Stimaddict
- Active Developer
- Posts: 991
- Joined: Wed Oct 25, 2017 11:56 am
- Location: UK