Tip: Stand for 2B
-
- Newbie
- Posts: 1
- Joined: Thu Oct 08, 2020 2:00 pm
- Location: Paris
Tip: Stand for 2B
I bought a 2B a few months ago, after having used the ET312B for several years, and I am very pleased with the performance. However, one aspect of the 2B had been bothering me every time when using it: the placement of the connection of the power plug, which makes it impossible when connected to the mains to put the device upright or inclined, and as a result making it difficult to read the display when laying down on bed next to it.
Recently I found a cheap but perfect solution for this: the AmazonBasics tablet stand, on which the 2B can be put inclined or in upright position and which just offers enough space for the power plug below it. You can find this product on any Amazon website, this is a link to the stand in the UK store:
https://www.amazon.co.uk/AmazonBasics-I ... B006ZT4VA0
Recently I found a cheap but perfect solution for this: the AmazonBasics tablet stand, on which the 2B can be put inclined or in upright position and which just offers enough space for the power plug below it. You can find this product on any Amazon website, this is a link to the stand in the UK store:
https://www.amazon.co.uk/AmazonBasics-I ... B006ZT4VA0
-
- Active
- Posts: 4
- Joined: Sat Oct 10, 2020 12:48 pm
- Location: Paris
Re: Tip: Stand for 2B
Thanks for our tip, I am having the same problem. I will order this product.
-
- Active
- Posts: 89
- Joined: Sun Jan 24, 2021 8:22 am
- Location: United Kingdom
Re: Tip: Stand for 2B
My variation on the same theme, I can produce these, laser cut from Medite or Acrylic if anyone is interested. Two different angles as shown, upright or laid back.
You do not have the required permissions to view the files attached to this post.
-
- Active
- Posts: 13
- Joined: Sat Sep 05, 2020 10:46 am
- Location: Paris
Re: Tip: Stand for 2B
Your solution is excellent "beem2713"
I will try the same with plexy or wood
I will try the same with plexy or wood
-
- Active
- Posts: 89
- Joined: Sun Jan 24, 2021 8:22 am
- Location: United Kingdom
Re: Tip: Stand for 2B
A little more detail if it helps........
You do not have the required permissions to view the files attached to this post.
-
- Active
- Posts: 5
- Joined: Mon Mar 08, 2021 3:08 am
- Location: Australia
Re: Tip: Stand for 2B
Wow that’s a really practical idea. Mostly I’ve balanced the 2B on the edge of the bed, but having a proper stand would make it more stable. Thanks.
-
- Active
- Posts: 5
- Joined: Thu Aug 09, 2018 9:52 am
- Location: Berne
Re: Tip: Stand for 2B
Hallo 2713,
this is a very good idea... Could you possible publish the measures?
Thanks in advance
this is a very good idea... Could you possible publish the measures?
Thanks in advance
-
- Active
- Posts: 36
- Joined: Fri Dec 11, 2020 10:33 pm
- Location: Trois-Rivières
Re: Tip: Stand for 2B
I've been thinking of making one as project #2 after I receive the 2B.
-
- Active
- Posts: 31
- Joined: Thu Oct 10, 2019 7:25 pm
- Location: USA
Re: Tip: Stand for 2B
I just use my phone/tablet stand as mentioned in OP, it has a hole in the bottom for a charger and it swivels to whatever angle I need to see.
https://www.amazon.com/gp/product/B071K5XXVX/
https://www.amazon.com/gp/product/B071K5XXVX/
-
- Active Developer
- Posts: 165
- Joined: Sun Sep 09, 2018 2:40 pm
- Location: Germany
Re: Tip: Stand for 2B
It looks to me from the pictures like the lower grab rails are way too short for a 2B?Ohms wrote: ↑Thu Jun 03, 2021 8:08 pm I just use my phone/tablet stand as mentioned in OP, it has a hole in the bottom for a charger and it swivels to whatever angle I need to see.
https://www.amazon.com/gp/product/B071K5XXVX/
Greetings Deltus
---
DeepL helps me with the translation.
---
DeepL helps me with the translation.