Axis output connector
-
- Active
- Posts: 4
- Joined: Thu Dec 09, 2021 11:05 am
- Location: UK
Axis output connector
Hi - does anyone know any information about the output connectors on the Axis ? They are surface mounted 90 degree connectors and I need to replace one. I think they are the same connectors for all or most Elestrastim devices. They look slightly like Fakra connectors but I don't think they are. Information on the type, series, manufacturer, spare parts seller etc would be much appreciated thank you.
- Stimaddict
- Active Developer
- Posts: 1023
- Joined: Wed Oct 25, 2017 11:56 am
- Location: UK
Re: Axis output connector
The Axis takes any standard TENS cable with a female plug - https://tinyurl.com/mtc2hj6u
-
- Active
- Posts: 4
- Joined: Thu Dec 09, 2021 11:05 am
- Location: UK
Re: Axis output connector
Thanks - unfortunately I'm not after the cables, I'm after the connectors for the cables that solder onto the circuit board. Cheers.
-
- Active Developer
- Posts: 108
- Joined: Sat Dec 18, 2021 8:15 am
- Location: Cambridgeshire
Re: Axis output connector
It might be worth while to buy one of them cheap Chinese power boxes with the same connection and remove the socket from it.
-
- Active
- Posts: 4
- Joined: Thu Dec 09, 2021 11:05 am
- Location: UK
Re: Axis output connector
Thanks - do you know of any that have the same type of connectors ?soundcraft wrote: ↑Wed Dec 29, 2021 11:05 am It might be worth while to buy one of them cheap Chinese power boxes with the same connection and remove the socket from it.
- admin
- Site Admin
- Posts: 2168
- Joined: Tue Feb 19, 2008 8:14 pm
- Location: Watford,UK
- Contact:
Re: Axis output connector
Generally the cheap TENS units all use the same connector.Bob1 wrote: ↑Fri Dec 31, 2021 11:13 amThanks - do you know of any that have the same type of connectors ?soundcraft wrote: ↑Wed Dec 29, 2021 11:05 am It might be worth while to buy one of them cheap Chinese power boxes with the same connection and remove the socket from it.
Si
E-Stim Systems Ltd
-
- Active Developer
- Posts: 108
- Joined: Sat Dec 18, 2021 8:15 am
- Location: Cambridgeshire
Re: Axis output connector
Not all of them have the same connectors. Had a little look on ebayBob1 wrote: ↑Fri Dec 31, 2021 11:13 amsoundcraft wrote: ↑Wed Dec 29, 2021 11:05 am It might be worth while to buy one of them cheap Chinese power boxes with the same connection and remove the socket from it.
Thanks - do you know of any that have the same type of connectors ?
The logistim tn-11 has the same type of connector I got one before I got my Axis ( wasted money LOL )
There is also Patterson Medical TPN 200 Plus
I would try and contact ElectraStim first though. it might work out cheaper to get them to fix is if these connectors do not fit. Also the Axis is a real pain in the ass to get apart.
-
- Active
- Posts: 4
- Joined: Thu Dec 09, 2021 11:05 am
- Location: UK
Re: Axis output connector
Thanks - very helpful information cheers. Personally I haven't found the Axis difficult to open up - maybe you have missed the hidden screw underneather the front label that you need to remove ? Thanks again.soundcraft wrote: ↑Sun Jan 02, 2022 12:27 pmNot all of them have the same connectors. Had a little look on ebayBob1 wrote: ↑Fri Dec 31, 2021 11:13 amsoundcraft wrote: ↑Wed Dec 29, 2021 11:05 am It might be worth while to buy one of them cheap Chinese power boxes with the same connection and remove the socket from it.
Thanks - do you know of any that have the same type of connectors ?
The logistim tn-11 has the same type of connector I got one before I got my Axis ( wasted money LOL )
There is also Patterson Medical TPN 200 Plus
I would try and contact ElectraStim first though. it might work out cheaper to get them to fix is if these connectors do not fit. Also the Axis is a real pain in the ass to get apart.
-
- Active Developer
- Posts: 108
- Joined: Sat Dec 18, 2021 8:15 am
- Location: Cambridgeshire
Re: Axis output connector
Have the fixed it yet?