Moaner sipping out...

General Chit Chat about E-Stim. Not just E-Stim Systems, but ErosTek, PES and others.
estimator
Active
Posts: 11
Joined: Mon Jan 23, 2023 10:29 am
Location: London

Moaner sipping out...

Post by estimator »

I've used the 'moaner' and find that its design (pertaining to my body) doesn't work too well.
Finding the right electrode is an expensive venture. It's not like buying a pair of shoes where you can try a few pairs on to get the right fit. Lol.
It's like throwing money in a hole (pun intended ;)
The longer centre isolation stem and smaller head pole mean the sphincter closes onto the isolation stem and the electrode slips out...
This, as expected gives a static, fizzing, pins and needles sensation.
I place a towel against the base to keep it in place but still find the sensation much the same.
In my experience the flange on the electrode also prevents it sitting close the the arsehole and causes the poor contact.
Anyone else having these issues?

Maybe I'm missing a trick here?
I've read many positive experiences with the moaner on this forum.
I understand that body types are different.

As a result of this I've bought a bobble (in the post) which I'm hoping will solve this problem by seating itself in place.


mrbutt89
Active Developer
Posts: 565
Joined: Wed Feb 23, 2011 11:06 am
Location: Rayleigh, Essex, UK

Re: Moaner sipping out...

Post by mrbutt89 »

As you say, everyone's body is different. My experience with the Bobble is that it slips out more easily than the Moaner, unless I'm sitting/lying on it. However, there aren't problems with electrical contact at the sphincter end once I'm sitting on it, so this might be the right one for you.
User avatar
admin
Site Admin
Posts: 2100
Joined: Tue Feb 19, 2008 8:14 pm
Location: Watford,UK
Contact:

Re: Moaner sipping out...

Post by admin »

The MJ has a smaller neck...could this help?

Si
E-Stim Systems Ltd
estimator
Active
Posts: 11
Joined: Mon Jan 23, 2023 10:29 am
Location: London

Re: Moaner sipping out...

Post by estimator »

mrbutt89 wrote: Mon Jan 23, 2023 11:44 am As you say, everyone's body is different. My experience with the Bobble is that it slips out more easily than the Moaner, unless I'm sitting/lying on it. However, there aren't problems with electrical contact at the sphincter end once I'm sitting on it, so this might be the right one for you.
Thanks for the reply. I don't like to sit when stimming with anal plug. Prefer to lay on my back, hence the problem.
With the Bobble, I'm hoping the curve between the first bobble and the base will serve to seat the sphincter and stop the movement.
estimator
Active
Posts: 11
Joined: Mon Jan 23, 2023 10:29 am
Location: London

Re: Moaner sipping out...

Post by estimator »

admin wrote: Mon Jan 23, 2023 1:13 pm The MJ has a smaller neck...could this help?

Si
Hi Si.

I looked at the MJ but it still looks like there'd be room for it to slip outwards.
spini
Active
Posts: 39
Joined: Sat Oct 14, 2017 4:03 am
Location: Sydney

Re: Moaner sipping out...

Post by spini »

I use the small Flo, and it also slips out easily, even when lieing on my back. Any source of inconsistent electrode output is an absolute no-no for estim. Unless you like that sort of thing, ofc!

My solution is complicated but works. The overall goal is similar to your towel trick - to apply inward force to the electrode such that it cant come out. But I achieve it in a different way, creating two anchor points (front and back) connected by (about) 3mm-diameter elastic shock cord that runs over the electrode's base.

1. To create the back anchor point, I tie some cord around my waist. Previously I have also tied a length of 30cm of shock cord to the centre of the waist-cord. When I put the waist-cord on, I do so such that the 30cm shock cord dangles down over my butt crack.

2. For the front anchor, I put something around my balls/balls+cock: eg a CR loop. I always have something around my balls for estim anyway, so this is no big deal.

3. I reach under balls to grab the loose end of the 30cm piece of shock cord, and pull it around to the front, so that I can now tie that loose end to whatever is around my balls/balls+cock. One now has an elastic cord under tension pressed reasonably tight along the perineum and butt crack.

4. I now get my Flo, which has two small additions: each socket is fitted with a 4mm-2mm adaptor. ( I always use the powerbox cables with 2mm pins, but as yet I will not have connected the cables from the powerbox). I insert the Flo, and now pull up on the 30cm shock cord and place it between the two adapters, such that it nestles against the base of the Flo, and exerts the desired inward force. I now connect the cables from the powerbox. One can use a similar approach with the 4mm-pin cables (and thus, no adaptors) but it's a lot more more fiddly that way - being able to secure the electrode in place before attaching the cables is much easier.

Love to hear of any simpler solution (apart from getting a bigger Flo!

Cheers
spini.
mrbutt89
Active Developer
Posts: 565
Joined: Wed Feb 23, 2011 11:06 am
Location: Rayleigh, Essex, UK

Re: Moaner sipping out...

Post by mrbutt89 »

estimator wrote: Mon Jan 23, 2023 3:33 pm Thanks for the reply. I don't like to sit when stimming with anal plug. Prefer to lay on my back, hence the problem.
With the Bobble, I'm hoping the curve between the first bobble and the base will serve to seat the sphincter and stop the movement.
When I lie down for stimming, I suppose my position could more accurately be described as "semi-recumbent", as I want to be able to look at my PC screen to control audio files etc., or sometimes to look at porn/photos. The Bobble stays firmly in place, and I suspect it probably would if I was in a fully flat supine position too.
Hastur
Active
Posts: 31
Joined: Tue Jan 10, 2023 11:50 pm
Location: France

Re: Moaner sipping out...

Post by Hastur »

I recently ordered Joanne's Moaner modified neck (https://store16866291.company.site/E-St ... p282211423), I'll let you know if it helps with slipping out when I have received and tested it.
ZappBrannigan
Active
Posts: 12
Joined: Thu Feb 11, 2021 10:03 pm
Location: UK

Re: Moaner sipping out...

Post by ZappBrannigan »

Modified neck sounds like a good place to start.
I am not convinced the Bobble would be a solution as it is eventually pushed out by my body if my partner does not provide some physical resistance, its a shame as the overall design concept is great but some of us need a slightly longer/slimmer neck-to-base as it currently keeps the sphincter more open and easier for some of us to expel.
As Si mentions if you do eventually look for an alternative electrode there is the MJ and also the E-WMCBP 2.0; 38mm or 44mm option and find it comfortable enough to be able to go 44mm (but this is very subjective for each person).
Zapp Brannigan: We need rest. The spirit is willing, but the flesh is spongy and bruised
User avatar
samcdestim
Active
Posts: 48
Joined: Sat Jun 11, 2016 10:36 am
Location: South Coast UK
Contact:

Re: Moaner sipping out...

Post by samcdestim »

A simple solution is to wear a pair of knickers or a thong. I found you can put the crotch between the connectors and will hold an anal probe in place.

You can get nice ones designed specifically for males with a suitable hole to drop your tackle through allowing you to still play.
Post Reply