Development Idea. Anyone Game?
Posted: Thu Jan 04, 2024 2:23 am
Hello All.
So I have it in my head, that I want to tie a few things together. I belive all the tech here to be mostly "off the shelf, open source" so it's just a manner of allowing them to speak together.
The jist of the idea is to take the "Edge-O-Matic" theory, of anal clenches before orgasm, and translate that into something usable on the 2B.
The 2B, has the USB connection, so the first part of this will require a custom written program (mac or pc based) that can control the 2b and read it's input / output.
As there already is a PC based programmer for the 2B, perhaps it can be modify'ed to the spec?
The 2nd part would be a input device, that can take a reading from a pressure / force sensor and connect that thru USB to the PC.
This sensor would be embedded inside of a small / large flow, or similar insertable.
The idea here, is that the PC based program will be able to read both the pressure / force readings, as well as the current / output on the 2b.
It would be able to compare them, so as to "learn" what is a false positive. IE, a clench caused by the Estim itself VS natural orgasm.
From there, a program could be written that could do all manor of things.
It could increase estim when it senses a orgasm coming, or it could decrease it.
If your using a 2 ch setup, perhaps it could increase one channel (on the flow / insertable) but decrease the penal glands channel.
This would ideally use some form of AI or basic learning, so that the goal could be set to prolong or delay orgasm. Tease more or punish for cumming. Etc.
Since you can set the "level" on the 2B, this could be done safely so as not to exceed what your comfortable with.
This could be further expanded, to also trigger / control a video / photo slide show.
Much like a powerpoint deck, containing images / video's that can be triggered in combination with the Estim adjustment, clench sensing, etc.
It could work to show "Hot" images or "Cold" images based on the state it reads.
Further expansion could occur if it were able to control bluetooth (buttplug.io) devices and such that could interact with other parts on the body.
Even further would be for it to use other sensors, such as a simple blue tooth finger / watch health monitor.
Using the heart BPM and other readings to assist in "real time" arousal state.
Some thoughts on the 2B
It has the audio input, which I think you could come up with a way to make a force transducer / pressure sensor output compatible with.
But as far as having a logic ability to "read" those levels and adjust programs on the fly? No idea if you could poll that data thru the USB.
It would be amazing if you could, that would at least remove the need for yet another device here to be connected.
Perhaps others here have hacked something like this together and can shed some light?
Maybe someone knows a programmer who can code and also not be all freaked about coding for sex tech?
Maybe someone is a electronics wiz and can machine up a flow with the added transducer connection's?
I'd have to pay a programmer, as I can not code, nor am I good enough with a raspberryPI etc to try to make something here.
(Well I MIGHT given enough time, to learn.. but frankly I do not want this to be a 3 year project with half done work.)
So putting it out to anyone who's open to a partnership that can bring the code / tech skills.
Myself I can bring some capital, design sense, spec's, sales / marketing of the device etc (and a willing "research" subject.)
So I have it in my head, that I want to tie a few things together. I belive all the tech here to be mostly "off the shelf, open source" so it's just a manner of allowing them to speak together.
The jist of the idea is to take the "Edge-O-Matic" theory, of anal clenches before orgasm, and translate that into something usable on the 2B.
The 2B, has the USB connection, so the first part of this will require a custom written program (mac or pc based) that can control the 2b and read it's input / output.
As there already is a PC based programmer for the 2B, perhaps it can be modify'ed to the spec?
The 2nd part would be a input device, that can take a reading from a pressure / force sensor and connect that thru USB to the PC.
This sensor would be embedded inside of a small / large flow, or similar insertable.
The idea here, is that the PC based program will be able to read both the pressure / force readings, as well as the current / output on the 2b.
It would be able to compare them, so as to "learn" what is a false positive. IE, a clench caused by the Estim itself VS natural orgasm.
From there, a program could be written that could do all manor of things.
It could increase estim when it senses a orgasm coming, or it could decrease it.
If your using a 2 ch setup, perhaps it could increase one channel (on the flow / insertable) but decrease the penal glands channel.
This would ideally use some form of AI or basic learning, so that the goal could be set to prolong or delay orgasm. Tease more or punish for cumming. Etc.
Since you can set the "level" on the 2B, this could be done safely so as not to exceed what your comfortable with.
This could be further expanded, to also trigger / control a video / photo slide show.
Much like a powerpoint deck, containing images / video's that can be triggered in combination with the Estim adjustment, clench sensing, etc.
It could work to show "Hot" images or "Cold" images based on the state it reads.
Further expansion could occur if it were able to control bluetooth (buttplug.io) devices and such that could interact with other parts on the body.
Even further would be for it to use other sensors, such as a simple blue tooth finger / watch health monitor.
Using the heart BPM and other readings to assist in "real time" arousal state.
Some thoughts on the 2B
It has the audio input, which I think you could come up with a way to make a force transducer / pressure sensor output compatible with.
But as far as having a logic ability to "read" those levels and adjust programs on the fly? No idea if you could poll that data thru the USB.
It would be amazing if you could, that would at least remove the need for yet another device here to be connected.
Perhaps others here have hacked something like this together and can shed some light?
Maybe someone knows a programmer who can code and also not be all freaked about coding for sex tech?
Maybe someone is a electronics wiz and can machine up a flow with the added transducer connection's?
I'd have to pay a programmer, as I can not code, nor am I good enough with a raspberryPI etc to try to make something here.
(Well I MIGHT given enough time, to learn.. but frankly I do not want this to be a 3 year project with half done work.)
So putting it out to anyone who's open to a partnership that can bring the code / tech skills.
Myself I can bring some capital, design sense, spec's, sales / marketing of the device etc (and a willing "research" subject.)