What do YOU want?
- admin
- Site Admin
- Posts: 2122
- Joined: Tue Feb 19, 2008 8:14 pm
- Location: Watford,UK
- Contact:
What do YOU want?
We are constantly looking to improve our products. Is there any thing YOU would like to added or changed? More Modes? More Power? Better Controls?
Ideas?
Ideas?
E-Stim Systems Ltd
- darkone
- Active
- Posts: 11
- Joined: Thu Mar 27, 2008 8:33 pm
- Location: London
Re: What do YOU want?
To be able to read the terms and conditions on the registration page, the colour scheme is not great and you have to tilt your lap top to be able to read the text that is not in yellow!!!!!!!!!!!!!!!!
Mwah
xXx Little One xXx
P.S. Every little helps!!!!!!!!!
Mwah
xXx Little One xXx
P.S. Every little helps!!!!!!!!!
- admin
- Site Admin
- Posts: 2122
- Joined: Tue Feb 19, 2008 8:14 pm
- Location: Watford,UK
- Contact:
Re: What do YOU want?
I've now edited the code and it should now be in a more tasteful (and easier to read!!!) blueLittleOne wrote:To be able to read the terms and conditions on the registration page, the colour scheme is not great and you have to tilt your lap top to be able to read the text that is not in yellow!!!!!!!!!!!!!!!!
Mwah
xXx Little One xXx
P.S. Every little helps!!!!!!!!!
E-Stim Systems Ltd
-
- Newbie
- Posts: 1
- Joined: Sun Jul 27, 2008 7:41 pm
Re: What do YOU want?
I agree... ABox with stereo! A stereo sound signal could then be divided into two separate stim channels so three electrodes can be used. Also, higher output power for even sweeter erotic feelings.
- neo80
- Active Developer
- Posts: 261
- Joined: Tue Feb 08, 2011 3:21 pm
- Location: Madrid (Spain)
- Contact:
Re: What do YOU want?
I'm thinking about to control a box easely over the internet, maybe writing commands on msn or skype, or something similar.
neo says:
ES2B_powerA=53
And the unit is turned up to 53% automatically
... And maybe more power, too
neo says:
ES2B_powerA=53
And the unit is turned up to 53% automatically
... And maybe more power, too
-
- Active Developer
- Posts: 568
- Joined: Wed Feb 23, 2011 11:06 am
- Location: Rayleigh, Essex, UK
Re: What do YOU want?
I've been using my 2B for just over a week now, and I've already had a lot of pleasure from it.
Just one thing that strikes me as a solo user is that the controls/ display are not necessarily positioned in an ideal manner for someone who is lying down to use it, e.g. on a bed.
I've found it much more user-friendly when the case is stood up vertically on its top surface. This means that the display is upside down, but it's more easily visible and the controls are also more easily accessible. It will not stand up on its bottom edge because of the power input and power switch.
Is there any possibility that you could create a simple stand for the unit, to hold it at, say, 45° to the vertical, for those who, like me, lie down to use it?
Another solution would be to incorporate a fold-out stand into the rear of the unit, but that would involve a major redesign, possibly with the re-siting of the power input and power switch on the left-hand side of the unit.
Just a suggestion. Certainly no complaints as far as the effectiveness of the unit is concerned.
Just one thing that strikes me as a solo user is that the controls/ display are not necessarily positioned in an ideal manner for someone who is lying down to use it, e.g. on a bed.
I've found it much more user-friendly when the case is stood up vertically on its top surface. This means that the display is upside down, but it's more easily visible and the controls are also more easily accessible. It will not stand up on its bottom edge because of the power input and power switch.
Is there any possibility that you could create a simple stand for the unit, to hold it at, say, 45° to the vertical, for those who, like me, lie down to use it?
Another solution would be to incorporate a fold-out stand into the rear of the unit, but that would involve a major redesign, possibly with the re-siting of the power input and power switch on the left-hand side of the unit.
Just a suggestion. Certainly no complaints as far as the effectiveness of the unit is concerned.
- estim_si
- Staff
- Posts: 365
- Joined: Tue Feb 19, 2008 11:23 pm
- Location: Watford
- Contact:
Re: What do YOU want?
Its being worked on . We are looking at a USB/Serial link to connect the 2B to a PC, once we have this connection them we will look at internet connection etcneo80 wrote:I'm thinking about to control a box easely over the internet, maybe writing commands on msn or skype, or something similar.
neo says:
ES2B_powerA=53
And the unit is turned up to 53% automatically
... And maybe more power, too
Si
- neo80
- Active Developer
- Posts: 261
- Joined: Tue Feb 08, 2011 3:21 pm
- Location: Madrid (Spain)
- Contact:
Re: What do YOU want?
Maybe an I2C bus could be very interesting...
http://www.i2c-bus.org/
...And have I mentioned more power, too?
http://www.i2c-bus.org/
...And have I mentioned more power, too?
-
- Newbie
- Posts: 3
- Joined: Mon Jul 11, 2011 9:43 pm
- Location: Blackpool
Re: What do YOU want?
Hi ..
Currently it seems that whenever you switch modes or turn the box off it reverts to low power setting, it would be nice if when you switch the box from low to high power it stayed set at high power even when you turn it off.
Currently it seems that whenever you switch modes or turn the box off it reverts to low power setting, it would be nice if when you switch the box from low to high power it stayed set at high power even when you turn it off.