www.e-stim.net

I love that your anal plugs can be dismantled to be thoroughly cleaned. When I put them back together I make sure they're screwed together tightly so nothing can move or pinch. However, this sometimes I do this a little too well and/or some environmental factor makes it fit together more tightly and I can't unscrew the head from the bolt that holds the plug together.

What would be useful is for there to be some kind of key in the bolt, maybe just a slot in the head of the bolt that I can put something into (e.g. screwdriver) to stop the bolt spinning while I'm turning the head trying to unfasten it. Or perhaps even provide a tool that will fit to aid in dis/reassembly for cleaning.

Other than that, I love the Moaner. It certainly lives up to its name!

Its something I am working on at the moment, watch this space.

Si

I like your anal electrodes. I used Moaner and MJ, and I am very satisfied. I would like to try something bigger. I thought I'd try Stuffer, but he looks scary big. I think I'll try the Large Torpedo.
What would you recommend to me, or do you have any advice for me?

Click on the tab towards the bottom on 'Additional Information' The manual link is there.

or try http://store.e-stim.co.uk/downloads/manuals/2B.pdf

Ok, now I feel stupid for missing the tabs on the product page.
Must have read the page 2 or 3 times and just skipped over it.

Thank you very much for pointing me in the right direction.

The triphase cable could be improved by also color coding the two black input plugs. Right now, every time I connect it i'm like OK, which channel is the red one and which is the blue one?!

silicum wrote:The triphase cable could be improved by also color coding the two black input plugs. Right now, every time I connect it i'm like OK, which channel is the red one and which is the blue one?!

I agree. I've wound a red rubber band round the plug which connects to the red output, but a colour-coded plug would be better. (A red dot or collar, for example.)

I would like to see more modes the take advantage of stereo output - strokes, squeezes, etc. that have the signal moving smoothly between A and B outputs. Wouldn't necessarily require triphase, but would certainly be enhanced by using it. Similar to Bounce, but where that mode has a very "digital" feel (all A, all B, all A, etc.) I'd like to see/feel the signal "moving around".

As mentioned a few years ago by someone else, moving the power plug on the 2B to the side or top of the unit would be nice. I often use my unit lying down on my back and usually tilt the unit up so I can read the display resting the bottom on my chest. This awkwardly bends the power plug cable though. After a few years of this, I'm starting to notice signs of stress on the cord. Moving it to the side would be nice or switching to a low-profile right angle plug might help too without a case redesign.