Hi,
i recently bought a 2B unit. After a fairly fast shipping procedure i was happy to receive the unit. (I have to admit i was a tad disappointed in the construction quality: when it came out of the shrink wrap 1 screw was missing, 2 screws fell on the floor and I'm unable to screw them back in so the device is held together by 1 screw and a thick rubber band)
But enough complaints, the unit works
I want to do some electrotorture scenes with the random option: I'd like the unit to give random shocks: the timing should be at least one shock a minute and the strength should be well, random: from barely noticable to all helll unleashed. What are the settings I should use?
100:100 i get fast shocks that hurt a little (tested 20 minutes)
1:100 i notice noting (tested 20 minutes)
100:2 i noticed some shocks, not all that painfull (tested 20 minutes)
1:2 i noticed nothing (tested 20 minutes)
random help
- admin
- Site Admin
- Posts: 2119
- Joined: Tue Feb 19, 2008 8:14 pm
- Location: Watford,UK
- Contact:
Re: random help
I'm sorry to hear about the screw issue... if you send us an email (info@e-stim.co.uk), we can sort out a replacement.
The random mode is random but over a very small time period, a matter of seconds rather than the minutes you mention... we have longer intervals planned, but they are not ready yet.
Hope this helps
Admin
The random mode is random but over a very small time period, a matter of seconds rather than the minutes you mention... we have longer intervals planned, but they are not ready yet.
Hope this helps
Admin
E-Stim Systems Ltd