Page 1 of 1
Boosting ABox output
Posted: Thu Sep 26, 2013 5:02 pm
by myk
Hi
Is it possible to boost the Abox power output by playing it through in line audio transformers (reverse wired) such as Maplins LT700?
Myk
Re: Boosting ABox output
Posted: Mon Oct 07, 2013 9:25 am
by admin
It is not something we would recommend.
Si
Re: Boosting ABox output
Posted: Mon Oct 07, 2013 4:59 pm
by myk
Hi Si
Why is that? I would use appropriate resistors to avoid shorting problems.
While on this topic, is there any possibility of running the Abox from the mains as with the 2B unit?
Myk
Re: Boosting ABox output
Posted: Wed Oct 09, 2013 9:41 am
by admin
Running the
ABox from the mains is certainly something I would not do, as you would have no protection from faults, the
2B has isolation built in which giver a far greater level of protection.
Why don't we recommend the additional transformer route? Well as we are the manufacturer of the ABox, if you performed such modifications and we said they were a good idea, and sonething went wrong, we would be liable, and our insurers would not be happy. We don't recommend any alterations to the units, as you will generally always find issues that have not been considered, the ABox output circuit was never designed to drive a transformer, any attempt could either damage the ABox, (the lifetime guarantee doesn't cover blowing it up because you connected it to a transformer), or could cause serious burns, (Most transformer stim designs are using 9-12V inputs, not 40-60V inputs)
Si
Re: Boosting ABox output
Posted: Wed Oct 16, 2013 1:19 pm
by myk
Thanks Si
Noted.
myk