Re: Software for creating audio
Posted: Fri Jun 25, 2021 9:52 am
Thought this may help some folks….
Open Audacity. https://www.audacityteam.org
Choose GENERATE from the top Menu, then TONE in the list that appears.
A box pops up…set it to –
WAVEFORM – SINE
FREQUENCY – your choice…I use 396Hz
AMPLITUDE – 0.9 (gives just below Max power waveform)
DURATION – 00h 30m 00s (makes a file 30 minutes long)
Click OK…the Sine Waveform will be generated.
Next, click EFFECTS in top Menu. Scroll down the list that appears below, click TREMOLO.
A box pops up…set it to –
WAVEFORM TYPE – Sine
STARTING PHASE (degrees) – 0
WET LEVEL (percent) – 100
FREQUENCY (Hertz) – 0.3
Click OK…the Sine Wave will be modified to rise and fall from Zero too 100 percent Volume.
To Save this as a File, FILE, EXPORT, EXPORT AS MP3 (or WAV if you want)
You should now have a basic (Mono)ES pattern to use. To make a Stereo or Triphase pattern, simply repeat the above steps, but use a faster “rise and fall”, then combine the two files as Left and Right channels as a Stereo file.
Joining tracks to make a stereo track
Choosing “Make Stereo Track” from the Track Dropdown Menu of the upper track of a pair of mono, left or right channel tracks (in any combination) will combine those two tracks into one stereo track. The upper track will become the left channel of the stereo track and the lower track will become the right channel regardless of their current designation as mono, left or right.
Open Audacity. https://www.audacityteam.org
Choose GENERATE from the top Menu, then TONE in the list that appears.
A box pops up…set it to –
WAVEFORM – SINE
FREQUENCY – your choice…I use 396Hz
AMPLITUDE – 0.9 (gives just below Max power waveform)
DURATION – 00h 30m 00s (makes a file 30 minutes long)
Click OK…the Sine Waveform will be generated.
Next, click EFFECTS in top Menu. Scroll down the list that appears below, click TREMOLO.
A box pops up…set it to –
WAVEFORM TYPE – Sine
STARTING PHASE (degrees) – 0
WET LEVEL (percent) – 100
FREQUENCY (Hertz) – 0.3
Click OK…the Sine Wave will be modified to rise and fall from Zero too 100 percent Volume.
To Save this as a File, FILE, EXPORT, EXPORT AS MP3 (or WAV if you want)
You should now have a basic (Mono)ES pattern to use. To make a Stereo or Triphase pattern, simply repeat the above steps, but use a faster “rise and fall”, then combine the two files as Left and Right channels as a Stereo file.
Joining tracks to make a stereo track
Choosing “Make Stereo Track” from the Track Dropdown Menu of the upper track of a pair of mono, left or right channel tracks (in any combination) will combine those two tracks into one stereo track. The upper track will become the left channel of the stereo track and the lower track will become the right channel regardless of their current designation as mono, left or right.