www.e-stim.net

I just purchased a 2b with a number of rubber rings and a prostate probe. As I am relatively new to this, I was wondering does anyone have or know of a guide for placement of electrodes? I haven't seen anything about this and would like a bit of guidance. Otherwise feel free to offer some suggestions and what program you like for that configuration. Also, I was interested in audio too, so suggestions that way would be great.

Thank you!

I have never used an insertable trode but I have made many with lead free plumbing solder when I had made a davey box stereo stim rig. I have recently got rubber loops and had my first hfo with the 2b earlier today. I just used one channel. Black lead to the base of the penis and the red lead just behind the head. Was using the throb program at a setting of 10:50 and jacked the power as I was getting close. High power mode is what I used. Maybe start with simple set ups find what works and feels good and then experiment more.

I usually find cock head and groin on one channel (loops and pads) then an insertable probe on the other is a good start.

Found some amazing audio today:

https://estimaudio.bandcamp.com/album/f ... -downloads

The ceramic tracks are just what I like, nothing sharp and spiky just throbby and alternating.

I usually use both channels:

Channel A:
[+] at cock head, around glans
[-] around balls (I use a metal ball ring, about 200g)

Channel B:
[+] ass (anal probe)
[-] around balls as well

My go-to placement is a triphase one - Left to CR loop on head of penis, Right to prostate end of anal insertable ("Moaner" in my case) and Common to CR loop / ring at base of penis. If you don't have a triphase cable, you can try taking the black leads from both channels and inserting one into each end of a CR loop, leaving the red leads free for the other two connections.

Triphase cable with two rubber loops (one at the crotch behind the balls, the other one around the head) and an insertable against the prostate is just the best combination for me...! Hfo every time after I leaked precum like a faucet...!

And for all newbies with the 2B, be aware that the power will dramatically change if you use it on batteries or plugged in...

Hi,

I've never had this idea :
Connecting the black wires of the 2 channels on the same rubber loop...
Is it safe for the 2B?
I'd like to try the triphased audio files too, but I don't have the cable...

For me quite the same setup :
Chan A : Corona red wire / base of the penis and balls black wire
Chan B : insertable plug bipolar - torpedo (red deeper part / black outer part)

I enjoy too audio files
Just browse the Web, there are many... Most on some forum (I don't know if I can say the name...)... Let's just say it's about doing the "stim" things "smart" way ...

I use my 2b with a home mad tri-phase setup. I have made a 2 into 1 adapter for connecting up the 2 black leads, I use this either on a small bi-pole probe or on my home made golfball on a stick. Have found it to be really good with both negatives to one side of the probe (facing towards my cock and the other pole having the b live wire then the a live wire on a cum thru plug on my cock (obviously) I find with a tiny bit of viagra this makes for an amazing experience.

Is it just me that has erection issues with stim? Can be really annoying. I know you don't necessarily need to be hard but I find it helps to get to the old hfo, otherwise I kinda have to force it.

As for audio I need to get some more tracks as they are getting a bit stale. Still really like endurance run and make me cum now tho!

ELECTROZACK wrote:And for all newbies with the 2B, be aware that the power will dramatically change if you use it on batteries or plugged in...

Yeah!
Its very common on me to be with battery, plug the adapter without shut it off, and then... ¡¡¡F**** $·#@%~#!!!