Hi,
There is a question I didn't find here or in the user manual.
When you use the 2B, you connect for example one electrode on the head and one at the base of the cock. What wire do you connect on them? Is it important to put the red at the base and the black on the head? Or in the other way? Or it doesn't matter?
Thx for your answer
How to connect on body?
-
- Active
- Posts: 52
- Joined: Sat Jul 30, 2016 8:32 am
- Location: Paris
- admin
- Site Admin
- Posts: 2112
- Joined: Tue Feb 19, 2008 8:14 pm
- Location: Watford,UK
- Contact:
Re: How to connect on body?
It generally doesn't matter, and if I say one way then someone else will suggest the reverse.
Simple answer is try it and see.
Si
Simple answer is try it and see.
Si
E-Stim Systems Ltd
-
- Active
- Posts: 28
- Joined: Mon Feb 22, 2016 3:03 pm
Re: How to connect on body?
...but the sensation is different, depending on where you put red or black, isn't it?admin wrote:It generally doesn't matter
- admin
- Site Admin
- Posts: 2112
- Joined: Tue Feb 19, 2008 8:14 pm
- Location: Watford,UK
- Contact:
Re: How to connect on body?
Yes, but there is no right way or wrong way, just a different way.
Si
Si
E-Stim Systems Ltd
-
- Newbie
- Posts: 3
- Joined: Mon Aug 15, 2016 5:43 pm
- Location: Merseyside
Re: How to connect on body?
I've found the best way for me is the red on the head and the black on the base, unless you've got a connector with red/blue ends, in which case the blue goes on the head and the red on the base.
-
- Active
- Posts: 9
- Joined: Thu Nov 26, 2015 10:42 am
- Location: Spain
- Contact:
Re: How to connect on body?
The advice is to keep all E-STIM connections below the waist and never near or across the heart.
Re: How to connect on body?
As to some of the above comments regarding electrode placement pertains to me. I have difficult time deciding which channel to use in a tri phase wire set up. Male ends not marked for which channel and have red, blue and black on the three connector wires. Switching plug locations do make difference for feelings, but comes down to experimenting to achieve HFO.