Page 2 of 2
Re: New guy with home made urethral electro sound..
Posted: Fri Sep 24, 2021 7:05 pm
by estim_si
stepney wrote:Can anybody suggest which is the best beginner urethral plug for sounding?
Thanks a lot!
We do a nice range of sounds from a 6mm micro sound so not too big right up to a full size 12mm. Have a look on our store site
https://store.e-stim.co.uk
Si
Sent from my iPhone using Tapatalk
Re: New guy with home made urethral electro sound..
Posted: Thu Sep 30, 2021 5:16 pm
by Davespages
stepney wrote: ↑Wed Sep 22, 2021 11:41 am
Can anybody suggest which is the best beginner urethral plug for sounding?
Thanks a lot!
I would recommend the micro sound (it doesn't go too far in, so is comfortable and you can move around without the sound "bottoming out" if you are sat down
As for thickness... firstly I ordered the 10mm... that was too thick... my urethra just isn't that open.
Then I ordered the 6mm and that slid in waaaay to easy...
I then ordered the 8mm which is perfect for me. I can feel it well.
After googling, the average diameter if the urethra is 8mm so I should have done my research first.
If you have never inserted anything into your urethra before then perhaps the 6mm would be a good start...
Re: New guy with home made urethral electro sound..
Posted: Sat Oct 16, 2021 12:15 pm
by VFRman
Hello to all you sounding guys. I have a large collection of stainless sounds, such as the Hegar kit. However, for training their is only one I found that is properly designed. From USA, Tether Products. You need to go to the accessories page to find the stepped sound. I started with the 20fr -30fr ( French size, divide by 3 for mm) so this one, 6 to 10mm. The graduations are very gentle. For example, 25fr to 26fr is, 8.33mm to 8.66mm. I now have the next size up & can get to 31fr/10.33mm.
The process, for this old guy, is lots of patience & time. Will I ever get it all in, 36fr/12mm, who knows.
I am going to post on what I do for HFO later.
Re: New guy with home made urethral electro sound..
Posted: Sun Jul 24, 2022 7:12 pm
by Shedboy
I have been chasing HFO for some time and started trying to to directly stimulate through the prostate . I am using 2B on one channel with moaner and have tried variety of sounds, rosebud , van buren and now experimenting with the Guyon style but am finding the stim required is high power and withdrawing a Guyon back from full insertion that I can achieve does increase the stimulation a lot. Seems a shame to withdraw and my favourite are the 5 to 8 m diameter rose buds. Problem I find is that while the Guyon remains tight in place unsupported the VB’s and Rosebuds require support as I can soften while enhancing play with regular poppers.
I connect to the sound by using a clip to form circuit on one channel to centre point of moaner.
As power levels increase I can loose the early , what I assume, is direct prostate stimulation to a larger unspecific sensation with moaner ghosting as well. I can achieve. A flow on occasion but usually contraction sensations but no ejaculation presumably due to the inserted sound stopping the flow. One note of caution is that a Guyon sound is inserted a very long way and when in the moment so to speak , on hi power levels close to max I decided to withdraw the sound as I felt contraction sensations . Not to be recommended withdrawing through meatus unless you’re into pain which I am not .
I have sounded with additional conductive loops around cock base under sack and other loop under cock head but feel interference can occur seeming to increase power intensity .
All the sounds are long +300mm I sterilise with steam using sterile lube to lube the urethra sometimes for larger sounds i “inject” down the urethra the lube by sterile syringe
I saw a post of use f a hollow SS tube and this may be my next stage.