Page 1 of 1
Flashing screen while in stereo mode
Posted: Wed May 29, 2019 7:06 pm
by Tobjac
Hi guys, anybody else had this phenomenon? I used stereo mode with my iPad, and the screen startet flashing also the power symbol sometimes flashed between battery and main power supply ( I don’t have a power supply yet it’s just running on batteries). Except for that it is flashing it works just fine I think.
Re: Flashing screen while in stereo mode
Posted: Wed May 29, 2019 7:08 pm
by estim_si
Perfectly normally when you are driving the 2B heavily.
Si
Sent from my iPhone using Tapatalk
Re: Flashing screen while in stereo mode
Posted: Wed May 29, 2019 8:40 pm
by Tobjac
Good to know thanks!
Re: Flashing screen while in stereo mode
Posted: Thu May 30, 2019 9:49 am
by Stimaddict
Flashing screen is often an indication that the volume on your audio device is too high -
viewtopic.php?f=14&t=9670&p=14169#p14169
Re: Flashing screen while in stereo mode
Posted: Thu May 30, 2019 5:04 pm
by Tobjac
yeah i was at 100% because otherwise the indicators above the channel level were just not there.... or do they also start to appear with higher channel lvls? I've already read a few other posts here but still didn't get how to balance it best between volume and the channel level....
Re: Flashing screen while in stereo mode
Posted: Sat Jun 01, 2019 9:11 am
by Stimaddict
Tobjac wrote: ↑Thu May 30, 2019 5:04 pm
yeah i was at 100% because otherwise the indicators above the channel level were just not there.... or do they also start to appear with higher channel lvls?
No, when the track is playing the indicators (audio bars) will still move with the power knobs set to zero.
This was probably down to the actual stimfile you were using. For a simple explanation of
why some stimfiles don't work so well on the 2B see this post:
viewtopic.php?f=14&t=9774&p=14762#p14762